Conical Screw Mixer is worldwide acknowledged as the industrial standard conical shape mixer and Conical Screw Mixer is used on a wide variety of applications in the industry such as pharmaceutical, food, battery materials, dyestuff & pigment, chemical industry, fertilizer, rare earth, titanium powder etc. Conical Screw Mixer is widely used to mix powder-powder, power-liquid, especially for fine powder, fiber or chip-shaped materials
Â
Working Principle:
Conical screw mixer is made based on the principle of rotation and revolution, conveying the material along with the axle by means of rotation. Simultaneously, the material is upward and downward cycled by gyratory stirring along wall surface of cone, with the central revolution, conical screw mixer can be performed in the shortest time.
Â
Features:
1, homogeneous mixing & no deadcorner
2, short mixing time 5-15minutes
3, clean discharge & no leftover
4, central discharge valve:
Electronic, pneumatic, manual (optional)
Ball valve, flap valve, knife gate valve, butterfly valve (optional)
5, main shaft seal: Stuffing seal and air purge seal
6, drive: Siemens motor, cycloid or gear reducer
7, limit/safety switch (optional)
8, heating/cooling jacket optional)
Datasheet:
Â
Â
Â
| Â Â Model Project | All volume (M3) |
Loads coefficient | Electrical machiney power (KW) |
Size (mm)× Max-diameter ×High | Equipment weight (kg) |
| DSH-0.06 | 0.06 | 0.4-0.6 | 1.5 | φ630×1451 | 150 |
| DSH-0.1 | 0.1 | 0.4-0.6 | 1.5 | φ715×1569 | 250 |
| DSH-0.3 | 0.3 | 0.4-0.6 | 2.2 | φ920×1960 | 550 |
| DSH-0.5 | 0.5 | 0.4-0.6 | 3 | φ1140×2320 | 600 |
| DSH-1 | 1 | 0.4-0.6 | 4 | φ1480×2895 | 1200 |
| DSH-1.5 | 1.5 | 0.4-0.6 | 5.5 | φ1633×3210 | 1350 |
| DSH-2 | 2 | 0.4-0.6 | 5.5 | φ1816×3495 | 1500 |
| DSH-3 | 3 | 0.4-0.6 | 7.5 | φ2040×3760 | 2300 |
| DSH-4 | 4 | 0.4-0.6 | 11 | φ2250×4425 | 2520 |
| DSH-6 | 6 | 0.4-0.6 | 15 | φ2548×4940 | 3000 |
| DSH-8 | 8 | 0.4-0.6 | 18.5 | φ2780×5360 | 4500 |
| DSH-10 | 10 | 0.4-0.6 | 22 | φ3018×5815 | 5500 |
| DSH-12 | 12 | 0.4-0.6 | 22 | φ3204×6100 | 5900 |
| DSH-15 | 15 | 0.4-0.6 | 30 | φ3442×6540 | 6600 |
| DSH-20 | 20 | 0.4-0.6 | 37 | φ3805×7420 | 9800 |
| DSH-25 | 25 | 0.4-0.6 | 37 | φ4086×7800 | 10200 |
| DSH-30 | 30 | 0.4-0.6 | 45 | φ4330×8200 | 11500 |
 2.    Changes are available according to customer's special requirement;
 3.   Shuang Long Group might develop new data which is not modified timely on the Web.
Applications:
Construction Hoist Steel Structure
Construction Hoist Steel Structure means the construction hoist spare parts like Construction Hoist Mast Section, Passenger Hoist Cage, Construction Hoist Wall Tie and so on.
The length of each mast section is 1508mm, the rack is fixed on the mast by three bolts and it can be exchanged. For the single cage hoist there is only one rack on the mast section, and the mast section can be used for the double cages hoist by increasing one rack. The section of the mast is diverse, select one type section according to different hoist. The mast sections are bolted together with M24 bolts and nuts to form mast. The mast is tied to the building with tie-in and is the guide rail of the cage. According to the user`s or circumstance`s request, surface of mast is hot dip galvanized, which can prevent it rusting.
The tie-in(wall tie) is the linked part between mast and building, to keep the stabilization of the mast. Distance between the tie-in is about 6~9m alone the mast. There are several types of tie-in. Select one of them according to need, tie-in can adjust the vertical of mast in definite ranges. According to the user`s or circumstance`s request, surface of the tie-in is hot dip galvanized, which can prevent it rusting.
The cage dimension(L×W×H)(m): 3×1.5×2.5. We can also manufacture cages of other size according to the user`s needs. The material of the cage and the door material can be steel wire weave, aluminum-plastic panel, punched-plate, figured aluminum board or other type according to user`s needs. The gate is equipped with drawing gate,include small turn over gate.
Construction Hoist Mast Section,Building Hoist Mast Section,Passenger Hoist Cage,Construction Hoist Wall Tie, Construction Hoist Anchorage Frame
SHEN YANG BAOQUAN BUSINESS CO., LTD , https://www.syconstructionhoist.com