The main protective function of aerial vehicles safety belts

Almost everyone may think that the seat belt is "pull it up and buckle it up". Although it is just a simple strap that can be buckled, it can save you at a critical moment. In the event of a collision, the seat belt can firmly attach the occupants to the seat, and with the buffer protection of the airbag, the damage caused by the impact can be greatly reduced.

The main protective functions of aerial work belts are:

1. Deceleration in the event of a crash, so that the driver and the driver do not have a second impact with the steering wheel, instrument panel, windshield, and other items;

2. The effect of deceleration force can be buffered again through the extension of the seat belt;

3. Prevent occupants in the car from being thrown out of the car in an emergency.

Therefore, before you put on the handbrake, ensure that your seat belt is always on your body. This is the most basic habit of driving.

Resistance Forming Machine

SF-200 is a Hand belt type resistance Forming Machine which is the best selection for mass production.Easy adjustment,operation and long life.

SF-201 is the same as SF-200,Beside above ,they are Loose Tape resistance Former suitable for vertical or horizontal shaping of resistors and diodes.

SF-202Component bending forming machine is bulk, with resistance and diodes are available.Foot cutting, bending can be strengthened, foot long span can be adjusted.

SF-208FB Axial automatic resistor machine has three Models for Processing Different Type of Packing.

SF-206 The bulk Resistor Former has three models each for both M&C types.The difference are listed as follows:â‘ SF-206-MA;SF-206-CA for loose packed components â‘¡SF-206-MA;SF-206-CB for taped packed components â‘¢SF-206-MA;SF-206-C for using on both taped and loose packed components.

SF-208 Equipment K Type Resistance Molding Machine has three Models for Processing Different Type of Packing.â‘ Loose packed Model(SF-208-FA).â‘¡Taped Model(SF-208-FB).â‘¢ Loose packed/taped combinative Mode(SF-208-F).

SF-206MB The axial lead former m type has three models each for both M&C types.The difference are listed as follows:â‘ SF-206-MA;SF-206-CA for loose packed components â‘¡SF-206-MA;SF-206-CB for taped packed components â‘¢SF-206-MA;SF-206-C for using on both taped and loose packed components.It is also means automatic resistor forming m machine.

Resistance Molding Bending Machine,F Resistor Cutting Machine,Component Cutting Forming Machine,Components Lead Cutting Machines

SINGSUN ELECTRONIC SCIENCE & TECH CO.,LTD , https://www.szsingsunautomatic.com