Smear truck owner calls reflected that these days his suction truck cold car is difficult to start, the engine is also shaking at idle speed powerful, power is also reduced significantly, ask how it is, Hubei Chusheng Sewage Truck manufacturers engineers may be sucking The ignition coil of the dirty car broke down, and the owner asked, "Is the ignition coil broken and needs to be replaced? Engineers say this:
The role of the ignition coil is to convert the low-voltage electricity generated by the suction truck battery or generator to high voltage, which will cause a strong spark in the spark plug electrode, thereby igniting the air-fuel mixture in the cylinder. That is to say, in a sewage suction truck, the role of the ignition coil is like a transformer, which instantaneously converts a voltage of 12 volts into a voltage of 20,000 to 30,000 volts. The sewage suction truck needs such a large voltage to operate normally.
The problem with the ignition coil may be that the outer plastic package of the coil is broken or the copper wire inside is broken. This will cause the sewage suction truck to shake. This is related to driving conditions. Some vehicles that have been damaged for years are bad. For the owner, to make the ignition coil ignition coil used for a long time, on the one hand to pay attention to the use of spark plugs, the use of aging spark plug will increase the work load of the ignition coil, and pay attention to the car's water temperature, water temperature high ignition coil Easy to burn.
Ignition coil damage time will not be too long, if there is already a problem, the other should also be in a short time failure, so the sewage suction car manufacturer's engineers recommend that you replace the 4 sewage pump ignition coil At the same time, it is possible to reserve the ignition coil for which no problem has occurred yet.
About ThePool Float With Water Gun
[Material]: ordinary PVC or 6P environmental protection PVC (without phthalates)
[Color]: customized according to the international Pantone color card number
[Thickness]: It can be customized according to the thickness required by the customer
[Printing]: Four-color screen printing (monochrome, multi-color and patterns with gradient colors can be printed)
[Features]: It can be produced according to the specifications required by customers, suitable for children swimming, playing in the water, etc.
[Packing]: A single house is put into PE bag or color box (also can be packed according to customer requirements)
[Quality]: Each process has a special QC inspection, and the inflation inspection is carried out before packaging, and the product qualification rate is over 99%.
Features of water inflatable floating toys
*PVC inflatable products are airtight airbag structure, soft and comfortable to use.
* Equipped with a safety inflatable valve (mouth), which can be fully charged at one time, and can be exhausted for multiple uses, which is durable.
* Fold and pack after deflation, light and convenient, easy to carry, does not take up space when storing
* The surface of the product is smooth, easy to clean, clean and hygienic.
Inflatable Floating Hoop,Swimming Pool Floats,Inflatable Pool Toys,Pool Games
P&D Plastic Manufacture Co., Ltd , https://www.jmpoolfloat.com