QK1319 Automatic cnc pipe threading cutting lathe pipe threading machine
The main performance characteristics:
Big spindle bore and double chuck allows clamp and process big diameter pipes;
Integral machine bed adopts high strength iron to relize high rigidity and precision;
Ultrasonic frequency quenched guide-ways are hard enough for good wear-resistance;
Carriage and guide way contact surface pasted with Turcite B to maintain long-term accuracy.
Application:
QK1313 CNC Heavy Duty Oil Pipe threading lathe machine is mainly designed to process all kinds of internal and external pipe threads including metric,inch,module,DP and taper threads,as well as having all the common functions of normal CNC lathe such as processing the inner bore and end face of shafts and disks.
This series lathe machine is widely used in industries including petroleum exploiting,coal and minerals mining,chemical piping and geological prospecting,it is high-efficiency equipment in processing and repairing drilling pipe,drilling rod,thread coupling and so on.
Standard Accessories:
GSK CNC system ,NC turret 4 position, Coolant system, Lubrication system, Lighting system, Mobile hand-wheel, Semi-shield, Manual tailstock, Chuck, Rear support bracket, Pad iron etc.
Optional Accessories:
CNC system(FANUC, Simens,Fagor,GSK,KND),Turret (Servo, hydraulic, power), Chip conveyor, Air conditioner, Full-shield, Hydraulic tailstock, Chuck, Center rest, Follower rest, Signal light, Grinding attachment etc.
Product main technical parameters:
| ITEMS | UNIT | QK1322 | |
| Capacity | Swing over bed | mm | Ø630/800 |
| Swing over cross slide | mm | Ø340/540 | |
| Distance between centers | mm | 1000/1500 / 3000 | |
| Pipe threading range | mm | Ø50-220 | |
| Width of bed way | mm | 550 | |
| Max.load capacity | T | 3 | |
| Spindle | Spindle bore | mm | Ø225 |
| Spindle speed steps | - | stepless | |
| Spindle speed range | rpm | 0-600 | |
| Chuck size | mm | Ø500 | |
| Chuck type | - | manual 3 jaw chuck | |
| Turret | Turret type | - | Â NC Turret 4 station |
| Tool shank size | mm | 32x32 | |
| Carriage | X axis travel | mm | 320/420 |
| Z axis travel | mm | 1350/2850 | |
| X axis rapid traverse speed | mm/min | 4000 | |
| Z axis rapid traverse speed | mm/min | 4000 | |
| Tailstock | Tailstock quill diameter | mm | Ø100 |
| Tailstock quill taper | - | MT#5 | |
| Tailstock quill travel | mm | 250 | |
| Motors | Main spindle motor | kW | servo15 |
| Coolant pump motor | kW | 0.125 | |
| Accuracy | Positioning accuracy | mm | 0.020 |
| Repositioning accuracy | mm | 0.010 | |
| Dimensions | Width x Height | mm | 1500x1560 |
| Length | mm | 3157/3657/5157 | |
| Weight | Net weight | T | 3.9/4.3/5.1 |
Â
Â
Highway Guardrail Roll Forming Machine is used in guardrail forming.
Hangzhou Yibo Machinery Co.,Ltd, founded in 2003 is an professional machinery manufacturer for design, produce, service and trade.
Yibo's main products are Cold Roll Forming Machine, such as purlin Forming Machine , guardrail forming machine, roof panel forming machine, wall panel forming machine, tile forming machine, floor Deck Forming Machine, Roof Seaming Machine and so on; steel coil process machinery such as Slitting Line , Cut to Length Line , combined line and so on; accessory Stamping Parts such as roof supporting clips, connect bar, water bar and so on.
Highway Guardrail Roll Forming Machine
Highway Guardrail Roll Forming Machine,Guardrail Roll Forming Machine,Highway Guardrail Roll Former
HANGZHOU IUWON TECHNOLOGY CO,. LTD. , https://www.iuwon.com