Hook arm garbage truck, also known as pull arm garbage truck, carriage garbage truck can be unloaded. The car is widely used for garbage treatment in urban streets. It can be equipped with multiple buckets in one vehicle, multiple garbage buckets placed in various garbage points, with self-unloading function, and hydraulic operation to facilitate dumping. The box body of the car is completely controlled by the hydraulic system. The car trash can be placed on various garbage collection stations on weekdays. After the garbage is full, the car can be directly directed to the garbage station and can be controlled by the hydraulic system. Put down the hook arm installed on the rear seat of the garbage truck, hang the connection point at the front end of the garbage box inside the station, and pull the waste bin to the rear seat of the vehicle body. At this time, the vehicle can be started and the garbage can be transported to the garbage disposal station. Dump dump. The main advantage of this car is that it can be equipped with multiple buckets. One car can maintain the operation of several garbage collection stations with high efficiency, and the cabinet is of a sealed type design and will not cause secondary pollution.
The pit-type garbage pool is common in small and medium-sized cities. It can be very smelly when the weather is hot, and it also attracts mosquitoes and flies, which makes the residents living nearby suffer miserable. In order to improve the living environment of the residents, we now fill the garbage pits in the pits, use hooked garbage trucks equipped with multiple closed bins to transport the garbage, remove the garbage in a unified manner, and provide residents with a good living environment.
Chery carriage detachable garbage truck, using Chery Karry chassis, Chery 75 hp engine, 4-speed gearbox, 2600mm wheelbase, 1 ton front axle, 3 ton rear axle, flat top single-row cab, 165R13LT 8PR tire, price: 68000
ã€The main technical parameters】 | |||
product name | Chery 3.5-car detachable garbage truck | Total mass (Kg) | 1980 |
Rated load quality (Kg) | 460 | Overall size (mm) | 4300×1620×1900 |
Service quality (Kg) | 1390 | Number of riders in the cab (person) | 2 |
Approach / departure angle) | 28/18 | Front suspension/rear suspension (mm) | 638/1062 |
Number of axes | 2 | Wheelbase (mm) | 2600 |
Axis load (Kg) | 645/1335 | The maximum speed (Km/h) | 110 |
other | Remarks: The optional kit can be installed without fog lamps. | ||
[chassis technical parameters] | |||
Overall size (mm) | 4377×1603×1894 | Number of tires | 4 |
Approach / departure angle) | 28/20 | Tire specifications | 165R13LT 8PR |
Number of leaf springs | -/3+2 | Front track (mm) | 1360 |
Fuel type | gasoline | Rear track (mm) | 1380 |
Emission Standards | GB18352.5-2013 State V | ||
engine model | Engine manufacturer | Displacement (ml) | Power (Kw) |
SQR472WF | Chery Automobile Co., Ltd. | 1083 | 55 |
Dongfeng Guowu 10-party Hook Arm Garbage Truck adopts Dongfeng Class II truck chassis, Cummins 170 hp engine, 3950mm wheelbase, 3.6 tons front axle, 8 tons rear axle, Dongfeng 6-speed gearbox
Price: 18100
ã€The main technical parameters】 | |||
product name | Dongfeng 10 square car detachable garbage truck | Total mass (Kg) | 15800 |
Rated load quality (Kg) | 8800 | Overall size (mm) | 6750,7100×2480×2950 |
Service quality (Kg) | 6805 | Number of riders in the cab (person) | 3 |
Approach / departure angle) | 24/15, 26/12 | Front suspension/rear suspension (mm) | 1250/1550, 1450/1150 |
Number of axes | 2 | Wheelbase (mm) | 3950,4500,4700,5100,5600 |
Axis load (Kg) | 5800/10000 | The maximum speed (Km/h) | 90 |
other | Remarks: The cab is installed with the chassis. The side rear protection is welded with Q235 material, the rear protection section size (mm): 50×120, the rear height from the ground 450mm. Install the driving recorder with satellite positioning function. ABS model / Manufacturer: 3631010-C2000/East Cochnoar Commercial Vehicle Brake System (Shiyan) Co., Ltd. | ||
[chassis technical parameters] | |||
Overall size (mm) | 7370,8200,8450,8850×2480×2850,2950 | Number of tires | 6 |
Approach / departure angle) | 24/16, 26/14 | Tire specifications | 9.00-20, 9.00R20, 10.00-20, 10.00R20, 295/80R22.5 |
Number of leaf springs | 9/10+8, 9/11+8 | Front track (mm) | 1910,1960 |
Fuel type | Diesel | Rear track (mm) | 1800,1860 |
Emission Standards | GB17691-2005 State V, GB3847-2005 | ||
engine model | Engine manufacturer | Displacement (ml) | Power (Kw) |
ISB170 50 Â | Dongfeng Cummins Engine Co., Ltd. Â | 5900 Â | 125 Â |
Hooking garbage truck garbage loading and unloading methods:
1. The locking hook operating handle is pushed to the retracted position, the locking cylinder is retracted, the locking rack is retracted, and the turnover frame and the attached frame are locked and fixed;
2. Pull the operating handle of the pull arm to the extended position, the pull arm cylinder is extended, the movable pull arm rotates around the front hinge axis of the flip frame, the pull arm is in the position of the hinge box, and the height of the pull arm hook is properly adjusted and bent with the box body. Hook alignment
3. When the hook is hooked to the box hook, continue to push the lower arm operating handle to the falling position, so that the garbage box continues to get on the car (Note: Ensure that the longitudinal beams of the garbage box are located at the rear of the attached frame and the rollers between);
4. When the garbage box is placed on the attached frame, loosen the handle of the pull arm to return it to the neutral position, and then pull the handle of the locking hook up to the locked position, and the locking cylinder extends to make the lock. The tension frame is turned upside down and the tilting frame is locked and fixed with the garbage box body. The handle is released to return it to the neutral position, the lifting work of the garbage box body is completed, the power take-off device is released, and the entire vehicle can be transported.
5. Before unloading the garbage, when the vehicle runs to 6 standard air pressure, hang the power take-off device and open the rear door locking device of the waste bin. At the front-stage double multi-way valve, first determine the locking frame to lock the garbage bin. (Pull up the locking hook operating handle to the locking position.) Then pull up the lever arm to the extended position. The waste container is tilted to lift the waste.
Car purchase process:
1: Car negotiation:
Contact by phone or site visit to discuss the vehicle model, price and related requirements.
2: sign the contract:
The two parties signed a contract for the purchase and sale of vehicles and paid a deposit in advance (a contract signed by facsimile or a contract signed on the ground).
3: Arrange production:
Our company arranges workshop production according to the contract requirements.
4: Delivery of vehicles:
The vehicle is delivered for inspection and acceptance, the remaining amount of the vehicle is paid, and relevant procedures are completed.
Delivery method: customers can mention the vehicle, but also can negotiate by the company to arrange delivery and agreement related costs. More detailed procedures for the car, please contact us!
Dear friends, warmly welcome you to come to the company for field trips, visits, negotiate to set the car! Any old customers introduce new customers, our company will give the greatest discount to protect the actual interests of customers.
Contact: Manager Zhou
hotline
Office Phone: 400-0722-618
Fax: 0722-3821899
e-mail:
Company Website: http://
IKIA Bicycle Ricing Helmet
The IKIA Racing Helmet have strong material. It is resistant for Water and shock. Suitable for any bicycle any pepole. We have the baby helmet , kids helmet and audlt helmet .
We accept OEM and ODM to our production, and we give the perfect service for pre-sales and after sale.
Key Specifications
- Materials: PC, PVC, EPS, PU foam, nylon and PP
- For protective use
- For adult use
- With adjustable size
-
Size: 58 to 61cm or to order
- Sleek and aerodynamic design
- Inner shell density: 90g/L
- Adjustable chin straps for additional comfort
- Weight: about 300g
- With quick-release strap buckle
- Offers protection whilst being comfortable to wear
- Available in 57 to 64cm sizes
- Available in different colors
- Comfortable and detachable padding
- Inner pads which run in direction of flow supports coolingeffect
-
Color :to order
Service:
1. Small MOQ, usually sample is available.2. Support OEM & ODM: we can print logo or customs package according to our client`s requirement.
3. Top quality: we have professional team to control the quality.
4. We work with DHL, UPS, FedEx, TNT and EMS for small order. For large order we can arrange shipment by air or by sea.
5. Satisfactory service: we treat clients as friends and 24 hours customer service
Bike Helmet,Bike Safety Helmet,Adult Bike Helmet,Children Bike Helmet
Hebei YIJIASHUN Trading Co.,Ltd , https://www.ikiabicycle.com