Guided by environmental protection policies, on April 15, 2017, FAW Xichai DPF Product Promotion Conference was held in Tianjin. The main purpose of this conference was to discuss how each vehicle manufacturer, dealer, and Xichai responded to the call of the country and played a "Blue Skies Battle," and talked about the blue road.
FAW Xichai DPF product promotion site
The trend of the times, the direction of the people
At the promotion meeting, Ji Yizhi, deputy director of FAW Xichai, stated that the development of DPF is a general trend, and the current auto industry is also accelerating the reshuffle due to technical issues.
Ji Yizhi believes that at present, the country’s determination to control air pollution is firm. As one of the sources of pollution, diesel vehicles must be stricter in emission control requirements. At the same time, Beijing proposed to install DPF as early as 2015. In a sense, the requirement for “2+26†urban vehicles to install DPF is a result of Beijing's demonstration effect amplification. Other cities are under the pressure of the people’s concern. It is highly likely that this will follow suit, and relevant policies will be issued one after another. In addition, the automotive industry is fully equipped to promote.
Ji Yi, Deputy Director of FAW Xichai
Why do you think that the auto industry is accelerating shuffle? According to Ji Yizhi, deputy director of the factory analysis: DPF is the technology used in the six stages of Europe, and we have only just adapted to the four countries, they require the installation of the national DPF on the national five. This means that you have to jump directly from State IV to Country VI. It can be imagined that a company that does not have a strong technical reserve can hardly adapt to such a "rhythm" and must be eliminated.
Ebb Tide, Shen for gold
Facing the rapid development of the domestic situation, how does Xichai deal with? The deputy director of Jiqi Shiyi of FAW Xichai has given the answer with the strength of the company as an entry point.
FAW Xichai has long been insightful and fully prepared for its experience in the engine industry for more than 70 years. With a strategic vision of looking at the world and looking into the future (5 years, 10 years, or even 20 years).
Conference show car
On the product is ready, 4DW engine has completed the first technology upgrade, to achieve volume sales on multiple models; in the service preparation, based on quantities on the situation, combined to create a "fine core service" brand, developed a comprehensive service policy; in In terms of user experience, full use of intelligent network technology, the introduction of intelligent car terminal network, giving users a more comfortable experience, this year will invest a few million dollars for users to use free of charge. In addition, Xichai also started from an innovative business model, based on full life cycle maintenance, to provide system solutions for large customers, fundamentally lifting the user's worries.
Ebb Tide, Shen who is gold. Only those companies that are fully prepared will be able to stay competitive in this round of DPF technology competition.
Work together with "core" to create a win-win situation
Yang Yang, Assistant to General Manager of FAW Xichai Sales Co., Ltd., said that the theme of the conference is to cooperate with the “core†to talk about blue roads. It means that Xichai actively responds to the policy call and is willing to speak with the government on the blue road. With the vehicle manufacturers, distributors, and the core work together to build a win-win situation.
Therefore, the Deputy Director of FAW Zichai Ji Yizhi emphasized at the press conference that dealers, automakers, and Xichai should further join forces to seize the market opportunities for installing DPF and do a good job jointly. It is necessary to work together to sort out the current kingpins and hot-selling models to ensure that when the market starts in the second half of the year, everyone has a car to sell, and they must jointly plan marketing activities to guide users to use DPF products. While joining hands, we must also do a good job of market services for DPF products and give users full support. In addition, the automaker will continue to build classic models and continuously increase its competitiveness in the market.
FAW Xichai DPF Products
How to "make a good fight against the blue skies", how to fulfill social responsibility at the same time, to achieve win-win situation with our customers, FAW Xichai has a long way to go. The road to product upgrading of the DPF technology line has only just begun. “The road is far away but the line will be short; if it is difficult, it must be done.†We always believe that with the powerful technology R&D platform and independent research and development advantages, FAW Xichai Will go further and better!
What is CNC Turning
In CNC turning, a chuck (or specialized clamp) holds bars of material and, as they are rotated, a tool is fed to the piece to remove material to create a specific shape. A turret, which holds a group of tools, is programmed to move along the work piece in three different axes of motion to shape the material according to the assigned specifications.
Since CNC turning involves removing material from a work piece, it`s considered a [subtraction machining" process. It is done on a lathe machine, which can be used on all types of material, from wood to metal to plastic. It can also be done on a mill or a drill press.
Turning is primarily used to create cylindrical parts. It can be completed on the outside or the inside of a work piece, which is known as boring. The process can also be used to conduct various other operations, including:
· Grooving: Cuts grooves or creates narrow cavities in work pieces.
· Taper turning: Creates a gradually decreasing diameter in a cylindrical shape.
· Drilling: Produces round holes, which are typically for screws and bolts.
· Facing: Cuts a flat surface perpendicular to the axes of the milling cutter.
· Parting: Separates one part of the work piece from another.
· Knurling: Creates vertical, horizontal or crossing lines on the work piece.
· Threading: Makes grooves that can be screwed into other objects.
CNC Turning process
l Creating a digital representation of the part in CAD
l Creating the machining code from the CAD files
l CNC lathe setup
l Manufacturing of the turned parts
Capabilities
|
|
Typical |
Feasible |
|
Shapes: |
Thin-walled: Cylindrical |
|
|
Part size: |
Diameter: 0.02 - 80 in |
|
|
Materials: |
Metals |
Ceramics |
|
Surface finish - Ra: |
16 - 125 μin |
2 - 250 μin |
|
Tolerance: |
± 0.001 in. |
± 0.0002 in. |
|
Max wall thickness: |
0.02 - 2.5 in. |
0.02 - 80 in. |
|
Quantity: |
1 - 1000 |
1 - 1000000 |
|
Advantages: |
All materials compatible |
|
|
Disadvantages: |
Limited to rotational parts |
|
|
Applications: |
Machine components, shafts, engine components |
|
Suitable Materials for Turning
In turning, the raw form of the material is a piece of stock from which the workpieces are cut. This stock is available in a variety of shapes such as solid cylindrical bars and hollow tubes. Custom extrusions or existing parts such as castings or forgings are also sometimes used.
Turning can be performed on a variety of materials, including most metals and plastics. Common materials that are used in turning include the following:
l Aluminum
l Brass
l Magnesium
l Nickel
l Steel
l Thermoset plastics
l Titanium
l Zinc
When selecting a material, several factors must be considered, including the cost, strength, resistance to wear, and machinability. The machinability of a material is difficult to quantify, but can be following characteristics:
l Results in a good surface finish
l Promotes long tool life
l Requires low force and power to turn
l Provides easy collection of chips
Cnc Turning,Cnc Mill Turn,Cnc Milling And Turning,Precision Cnc Turning
Suzhou FCE precision electronics Co., LTD , https://www.sjfukeyifcesz.com