PE Hollow Wall Winding Pipe Machine (SJ)

PE Hollow Wall Winding Pipe Machine (SJ)



MACHINE INTRODUCTION: 
The pipe used polyethylene (PE) as the main raw material preliminarily made into "T" shape plate belt and then the belt is wound and welded into pipe. At the same time, make the galvanized steel belt into a "U" shape steel belt and then is embedded into the groove of the two plate belt, then cover the embedded steel belt with PE sheet. This kind of pipe becomes the 3rd new generation of plastic and steel drain pipe.


PIPE FEATRUES: 
Advantages of both plastic - corrosion resistance and steel - tenacity. It is strongly recommended as the new type of environment protection drainage pipe by the government.
1. Light weight, easy installation;
2. Well sealed and no leakage;
3. Low cost of transport and construction;
4. Strong corrosion resistance, Strong resistance to abnormal sudden load, etc.
5. Diameter 300-3000 mm


PIPE APPLICATION 
Used in city sewage pipeline, industrial sewage pipeline, rainwater drainage pipeline, drainage pipeline for bridge, the agriculture irrigation pipe, water intake pipeline and so on.
It has big market prospects, and it is also the first choice for the important construction engineering projects.





EQUIPMENT LIST:
1. Single Screw Extruder
2. Cooling Water Tank
3. Haul-off Machine
4. Winding Machine
5. Cutting Machine
6. Stacker 



TRADE TERMS
Payment Term: 30% for prepayment by T/T, 70% for balanced payment by T/T, or L/C can be acceptable
Delivery Time: 40 days after receipt of prepayment.
Packing Method:  Packing film or wooden case
Guaranteed Time:  12 months
MACHINERUNNING TEST AND AFTER SERVICE
When machine finished, we will invited client come to our factory to check the machine and do the machine test. If machine is ok, then client pay for the balance. And inspect machine load the container.
When machine arrives client's factory, if client needs, we will send 1-2 engineer to client's factory do the machine installation and running test, and also train the local worker how to operate and maintain the machine. It is chargeable.
If have any question or problem on machine operation or maintain, welcome to contact to us by email or calling. We stand by 24 hours. 
CONTACT INFORMATION: 




COMPANY SHOW 





  PE Hollow Wall Winding Pipe Machine (SJ)



MACHINE INTRODUCTION: 
The pipe used polyethylene (PE) as the main raw material preliminarily made into "T" shape plate belt and then the belt is wound and welded into pipe. At the same time, make the galvanized steel belt into a "U" shape steel belt and then is embedded into the groove of the two plate belt, then cover the embedded steel belt with PE sheet. This kind of pipe becomes the 3rd new generation of plastic and steel drain pipe.


PIPE FEATRUES: 
Advantages of both plastic - corrosion resistance and steel - tenacity. It is strongly recommended as the new type of environment protection drainage pipe by the government.
1. Light weight, easy installation;
2. Well sealed and no leakage;
3. Low cost of transport and construction;
4. Strong corrosion resistance, Strong resistance to abnormal sudden load, etc.
5. Diameter 300-3000 mm


PIPE APPLICATION 
Used in city sewage pipeline, industrial sewage pipeline, rainwater drainage pipeline, drainage pipeline for bridge, the agriculture irrigation pipe, water intake pipeline and so on.
It has big market prospects, and it is also the first choice for the important construction engineering projects.





EQUIPMENT LIST:
1. Single Screw Extruder
2. Cooling Water Tank
3. Haul-off Machine
4. Winding Machine
5. Cutting Machine
6. Stacker 



TRADE TERMS
Payment Term: 30% for prepayment by T/T, 70% for balanced payment by T/T, or L/C can be acceptable
Delivery Time: 40 days after receipt of prepayment.
Packing Method:  Packing film or wooden case
Guaranteed Time:  12 months
MACHINERUNNING TEST AND AFTER SERVICE
When machine finished, we will invited client come to our factory to check the machine and do the machine test. If machine is ok, then client pay for the balance. And inspect machine load the container.
When machine arrives client's factory, if client needs, we will send 1-2 engineer to client's factory do the machine installation and running test, and also train the local worker how to operate and maintain the machine. It is chargeable.
If have any question or problem on machine operation or maintain, welcome to contact to us by email or calling. We stand by 24 hours. 
CONTACT INFORMATION: 




COMPANY SHOW 





 

Hot Rolled Steel Bar

We have lot of hot rolled steel bar raw steel materials which is used to do futher processing such as cold drawn round bar, square bar, hex bar, flat bar, peeled steel bar, ground and polished steel bar and do heat treatment on steel bars such as annealing, normalizing, quenching and tempering and some other CNC machining steel bar.

Hot Rolled Steel Round Bar,Carbon Steel Round Bar,Alloy Steel Round Bar,Chromium Nickel Molybdenum Steel

SHANDONG LE REN SPECIAL STEEL CO., LTD. , https://www.sdhighstrengthsteelbolts.com