- Model NO.: 55LBS, 30LBS
- Origin: Ningbo, China
- Pull Force: 30lbs, 55lbs
| Item | Magnetic Welding Holder/ welding holder/ welding magnaet with on/off switch |
| Pull Force | 30Lbs, 55Lbs |
| Use | Welding, soldering, assembly, marking-off & pipe installation |
*Welding magnet for flate and round materials as well as 45deg/90deg angles
*Pull Force: 30Lbs, 55Lbs
1. Item: Magnetic Welding Holder/ welding holder/ welding magnaet with on/off switch
2. Magnetic welding holder or welding magnet is Ideal for holding work pieces in place whilst you weld. Use for welding, soldering, assembly, marking-off & pipe installation.
3. These high quality welding magnets are designed for quick and accurate positioning of parts during tack welding, layout and assembly processes. Some common uses include positioning and holding work pieces and use during welding or general fabrication work.
4. Magnetic welding holer can be used on pipe, plate and tubing. The range includes: Magnetic holdfast and holders, magnetic positioners, magnetic mitre clamps, magnetic quick clamps, magnetic adjustable links, magnetic plate drags and earth welding clamps.
5. They are the perfect solution for welders looking to improve work quality and reduce costly setup time.
Reboiler (also weighing reboiler) as the name suggests is to make the liquid again vaporization. Its structure is similar to that of a condenser, but one is used to cool down.
The reboiler is combined with a fractionating Tower: the reboiler is a special Heat Exchanger that can exchange heat and have a vaporization space at the same time. The material level of the reboiler and the liquid level of the fractionating tower are at the same height. From the bottom of the tower to provide liquid phase into the reboiler. The liquid phase of the 25-30% is normally vaporized in the reboiler. The vaporized two-phase flow was sent back to the tower, return to the tower in the gas phase component upward through the tray, and the liquid components fall back to the bottom of the tower.
The material is heated in the reboiler expansion and vaporization density decreases, thus leaving vaporization space, smooth return to the tower, the tower of the return of gas-liquid two-phase flow, gas and liquid through the tray, fell to the bottom of the tower. Due to the role of static pressure difference, the bottom of the tower will continue to increase the evaporation of the liquid level.
Reboiler
Reboiler,Tube Heat Reboiler,Chemical Industrial Reboiler,Heat Exchanger Reboiler
Wuxi Weishitiong Machinery Co., Ltd. , http://www.madeinwst.com