(1) The length of the metal hose used as a compensator depends on the size of the passage.
(2) Pump inlet and pump outlet take over for vibration and noise elimination. The length depends on the size of its path.
(3) The angular displacement of the metal hose depends on its actual bending radius and displacement angle.
(4) The lateral displacement of the metal hose depends on the actual bending radius and the amount of lateral displacement.
(5) In the bent state, the length of the metal hose in which the parallel sections move longitudinally depends on the actual bending radius and the amount of longitudinal movement.
(6) In the bent state, the length of the metal hose in which the parallel sections move laterally depends on the actual bending radius and the amount of lateral movement.
(7) The metal hose used as the compensator is too long and will cause instability; the metal hoses used for pump inlet and pump outlet are too long and will generate additional vibration. The metal hose used in the piping system is too long. , will produce greater fluid resistance and so on.
Metal hoses under working conditions often cannot be compensated, damped, or eliminated due to inappropriate lengths. At the same time, other advantages of metal hoses are not fully reflected. Therefore, we must master the method of determining the length of the metal hose.
(2) Pump inlet and pump outlet take over for vibration and noise elimination. The length depends on the size of its path.
(3) The angular displacement of the metal hose depends on its actual bending radius and displacement angle.
(4) The lateral displacement of the metal hose depends on the actual bending radius and the amount of lateral displacement.
(5) In the bent state, the length of the metal hose in which the parallel sections move longitudinally depends on the actual bending radius and the amount of longitudinal movement.
(6) In the bent state, the length of the metal hose in which the parallel sections move laterally depends on the actual bending radius and the amount of lateral movement.
(7) The metal hose used as the compensator is too long and will cause instability; the metal hoses used for pump inlet and pump outlet are too long and will generate additional vibration. The metal hose used in the piping system is too long. , will produce greater fluid resistance and so on.
Metal hoses under working conditions often cannot be compensated, damped, or eliminated due to inappropriate lengths. At the same time, other advantages of metal hoses are not fully reflected. Therefore, we must master the method of determining the length of the metal hose.
Diversion Tube,Graphite Tube,Diversion Plate,Graphite Diversion Tube
Henan Carbon Road New Material Technology Co., Ltd , https://www.moldedgraphite.com