High Quality EPS Sandwich Panel Making Machine

High quality EPS Sandwich panel machine, sanwich panel line, sandwich panel making machine, insulated panel machine

Components of whole set sanwichpanel machine: 
Roll forming mahine and Sandwich panel press machine

Detailed specification of whole set sandwich panel machine: 

Introduction: 
Sandwich panel is a compound line, contain roll forming machine and sandwich panel rolling system. The whole line is controlled by the PLC control center. 

The material is steel sheet coil, its thickness can be 0.4-0.6mm, width can be 1250mm, the hydraulic strength ≤235MP. The stuffing is EPS or Rock Wool. 

Technical Parameters: 
 

1. Sandwich panel size: 

1. Length: ≥2m
2. Width: ≤1250mm
3. Thickness: As per the drawing

2. Steel sheet coil size: 

1. Thickness: 0.4mm-0.6mm
2. Width≤1250mm
3. The max weight: 5T
4. Inner diameter of coil: 500mm and 600mm
5. Outer diameter of coil: 1000mm

3. Stuffing material: EPS

Density≥18/m3, tolerance of straight≤1/m, arched tolerance≤3/m, Level tolerance≤ 1.5mm, EPS panel length≥3m. 
 

4. Stuffing material: Rock wool

Density≥100/m3, Rock wool panel length≥3m. 
 

5. Processing speed: 1000-3000mm/min (The speed can be adjusted)

6. The length of the whole line: 40m

7. The available Length of sandwich panel: 7.5m

8. Control center: PLC

9. Power of main motor: 40kw

10. Power source: 380V/3phase/50 Hz

11. Air pressure: 0.7MP (you can control by yourself)

12. The best working temperature: 25oC. 

13. Material of roller: C45steel hard chrome plating

14. Material of blade: Cr12

We also can design and manufacture as per your request! 

Perforated Metal Mesh

Perforated Metal Mesh, (also named Perforated Sheet, Perforated Metal) refers to the metal sheet products with various different holes on the surface. There are many kinds of punching wire mesh products. Different shapes, different sizes of holes, can adapt to different needs.

Material: Stainless steel, low carbon steel plate, galvanized, PVC, cold rolled coil, etc.

The types: pattern perforated sheet, forming perforated plate, extra thick punching net, ultra thin punching mesh, micro porous perforated sheet metal, wire cutting punching net, Laser punching net, etc.

Shape of Hole: Rectangular hole, square hole, diamond hole, round hole, hexagonal hole, cross hole, triangle hole, long round hole, long waist hole, plum blossom hole, fish scale hole, pattern hole, five pointed hole, irregular hole, bulge hole, etc.

Use: Sound-absorbing materials for ceilings and wall of buildings; Exquisite decorative board for building staircase, balcony, environmental protection desk and chair; Machinery and equipment protection cover, grille gorgeous, food, feed, mine mill sieve, sieve screen, I-beam, stainless steel kitchen equipment, food cover, blue fruit and other kitchen utensils, and shopping malls with shelves, exhibition decoration, ventilation network for grain depot, football turf seepage water filter and so on.

Size: 1.Thickness of coil: 0.2mm-1mm; Length: 20m

2. Diameter of hole: 1.5mm-10mm

3. Thickness of plate: 0.2mm-20mm;Width*Length≤1.5m*5m

4. Diameter of hole: 0.5mm-200mm

Hole diameter:

Generally speaking, the aperture size is approximately greater than or equal to the thickness of the plate, which is in accordance with the principle of minimum pore diameter. The closer the diameter of the hole to the thickness of the sheet, the greater the difficulty of processing and the higher the processing fee.. In some raw materials, the hole size can be less than the thickness of the plate.

Pitch

The pitch is the distance between the middle of a hole and the other one, the nearest hole in it. The middle distance is a way to represent the interval between holes, and the other is the rate of opening. The essential meaning of the two representations is the same. So you just need to identify one of them.
Arrangement of holes: (detailed picture explanation)
We can make all kinds of difficult passes and patterns. Although special requirements for pass and pattern require a specified processing fee, the quotation for the usual pass is quite reasonable.

(1) 60 degree staggered row
60 degree staggered row is one of the most popular choices with its natural high strength and wide aperture ratio and attractive appearance
(2) 45 degree staggered row

Compared with the former, the 45 degree plum blossom provides another choice for people.
(3) Straight Row

Another kind of round hole placement is straight row, straight row can also have a variety of holes and opening rate, but it is the hole in the series of the worst compressive strength.

Structure:

Perforated Metal Mesh,Perforated Metal Aluminum Mesh,Stretched Perforated Metal Mesh,Stainless Steel Perforated Metal Mesh

Anping Xinzheng Metal Wire Mesh Co., Ltd , https://www.sievingmesh.com