Application:
As we know, the purpose of your testing is to simulate environment inside the cargo flight when it carries
your cosmetic during transportation in high sky,Â
from taking off, leaving ground till it enters stratosphere for long distance cruise after uniform climbing.
During this proceeding, what we need to look into are 2 factors:Â
minimum cold temperature when it cruises in the stratosphere,Â
and the temperature changing speed while it climbs up after taking off and finally reaches the height to keep stable flying.Â
Due to limit of our professional knowledge in this particular field, we can't figure out how fast does the cargo flight climb up vertically per minute.
So we have no idea how fast does the temperature inside it change neither, however, as expert of science
research for such kind of testing, we are sure that you can find out these answers. If so,Â
it would be much great and better for both of us to judge the possibility of the above mentioned proposal.
Detailed technical spec
Â
Product model | YCTL-150 |
Power | 3 phase AC 380V 50Hz max, 6KW |
Inner chamber size(W*H*D) | 500*600*500mm |
Exterior chamber size (W*H*D) | 1210*1600*1250mm |
Temperature range | -70ºC ~ +155ºC |
Temperature fluctuation | ±0.2ºC(atmospheric pressure) |
Indication resolution | 0.01ºC |
Temperature uniformity | ±2ºC |
Heat up time | 3ºC/min |
Pressure range | 600mmHg to 1mmHg |
Pressure accuracy | ±0.1Kpa(</= 2Kpa); ±5%(2Kpa~40Kpa); ±2Kpa(>/=40Kpa) |
Depressurization time to 1mmHg (25ºC ± 10ºC) | 30min |
Insulation | Glass wool & PUF |
Perspiration resistant | K style tube |
Chamber materials | SUS#304 stainless steel for internal chamber, Galvanized steel with ivory white powder coated finish for exterior chamber. |
Accessories | 1. Temperature resistant silicone gasket * 1pcs 2. Cable port * 1pcs ¢100mm(50mm) 3. Window light * 1pcs 4. Multi pane vacuum glass window*1pcs |
Refrigeration & heating system
1. Original imported high efficiency compressor.
2. Air cooling condenser
3. Fin-tube heater
4. Original imported solenoid valves
5. Inner spiral K-type refrigerant copper tube
6. U-type finned electro thermal tube
7. Heating & cooling systems separated
8. Refrigerating system
Circling & Drain system
1. Centrifugal fan & imported motor
2. Reverse uniflow (air flow direction)
3. Flow-throws wind
4. Drain system uses swirl type outlet and U-type deposition unit
Programable micro-computer LCD touch controller
1. Program-able micro-computer LCD touch controller, user-friendly, stable and easy use.
2. Programs: edit up to 32 PTNs (800 steps per pattern), each PTN can be executed 999 times.
3. PID & SSR control way, stable and easy to use.
4. Korea TIME 1500 controller
More information wil be showing in quotation sheet and specification.
If you have any query, please feel free to contact Ms Vickey Huang back,
we would be happy to servise you.
Thanks in advance !
Yours sincerely
Ms. Vickey Huang
 Enviornmental high capacity high altitude machine
Application:
As we know, the purpose of your testing is to simulate environment inside the cargo flight when it carries
your cosmetic during transportation in high sky,Â
from taking off, leaving ground till it enters stratosphere for long distance cruise after uniform climbing.
During this proceeding, what we need to look into are 2 factors:Â
minimum cold temperature when it cruises in the stratosphere,Â
and the temperature changing speed while it climbs up after taking off and finally reaches the height to keep stable flying.Â
Due to limit of our professional knowledge in this particular field, we can't figure out how fast does the cargo flight climb up vertically per minute.
So we have no idea how fast does the temperature inside it change neither, however, as expert of science
research for such kind of testing, we are sure that you can find out these answers. If so,Â
it would be much great and better for both of us to judge the possibility of the above mentioned proposal.
Detailed technical spec
Â
Product model | YCTL-150 |
Power | 3 phase AC 380V 50Hz max, 6KW |
Inner chamber size(W*H*D) | 500*600*500mm |
Exterior chamber size (W*H*D) | 1210*1600*1250mm |
Temperature range | -70ºC ~ +155ºC |
Temperature fluctuation | ±0.2ºC(atmospheric pressure) |
Indication resolution | 0.01ºC |
Temperature uniformity | ±2ºC |
Heat up time | 3ºC/min |
Pressure range | 600mmHg to 1mmHg |
Pressure accuracy | ±0.1Kpa(</= 2Kpa); ±5%(2Kpa~40Kpa); ±2Kpa(>/=40Kpa) |
Depressurization time to 1mmHg (25ºC ± 10ºC) | 30min |
Insulation | Glass wool & PUF |
Perspiration resistant | K style tube |
Chamber materials | SUS#304 stainless steel for internal chamber, Galvanized steel with ivory white powder coated finish for exterior chamber. |
Accessories | 1. Temperature resistant silicone gasket * 1pcs 2. Cable port * 1pcs ¢100mm(50mm) 3. Window light * 1pcs 4. Multi pane vacuum glass window*1pcs |
Refrigeration & heating system
1. Original imported high efficiency compressor.
2. Air cooling condenser
3. Fin-tube heater
4. Original imported solenoid valves
5. Inner spiral K-type refrigerant copper tube
6. U-type finned electro thermal tube
7. Heating & cooling systems separated
8. Refrigerating system
Circling & Drain system
1. Centrifugal fan & imported motor
2. Reverse uniflow (air flow direction)
3. Flow-throws wind
4. Drain system uses swirl type outlet and U-type deposition unit
Programable micro-computer LCD touch controller
1. Program-able micro-computer LCD touch controller, user-friendly, stable and easy use.
2. Programs: edit up to 32 PTNs (800 steps per pattern), each PTN can be executed 999 times.
3. PID & SSR control way, stable and easy to use.
4. Korea TIME 1500 controller
More information wil be showing in quotation sheet and specification.
If you have any query, please feel free to contact Ms Vickey Huang back,
we would be happy to servise you.
Thanks in advance !
Yours sincerely
Ms. Vickey Huang
Â
Leisuwash specializing in manufacture Automatic Car Wash Machine, Touchless Car Wash , Automatic Touchless Car Wash, touchless car wash equipment, robot car wash, smart car wash system, leisuwash 360, leisuwash leibao 360, laserwash 360, leisuwash touchless car wash machine, leisu wash touchless car wash automatic, leisu wash 360 high pressure touchless car wash equipment, robo car wash, touch free car wash, leisuwash 360 touch free car wash, leisuwash 360 price, automatic car wash price, leisuwash in malaysia, no touch automatic car wash machine.
Leisuwash 360 touchless car wash machine high intelligent high quality, with car wash + car care + drying process totally, each car wash takes time 1 minute to 5 minutes which depends on the car wash mode.
Automatic touch free car wash equipment more and more popular in car wash business market, as can save employee fees and wash time mostly, bring investor much more benefit profit return. That's why choose the automatic car washing system.
Touch Free Car Wash Equipment,Automatic Car Wash,Leisuwash Touchless Car Wash,Automatic Car Wash Machine
Hangzhou Leisu Cleaning Equipment Co.,Ltd , https://www.sdautomaticcarwash.com