The constant temperature and humidity test chamber is a commonly used test equipment, and the compressor is the core component of the constant temperature and humidity test chamber and plays a direct role in the low temperature test. Therefore, the maintenance of the compressor is usually very important. According to the experience of Dongguan Teddy equipment in the ring test industry for many years, the following maintenance and repair suggestions are summarized:
1. Appropriate maintenance space is left around the equipment, there is no strong electromagnetic radiation source nearby, the ground is flat, and the ventilation is good. It does not contain flammable, explosive and corrosive gases.
2. Do not start the compressor frequently during the test, and the interval between the start of the compressor should be more than 15 minutes;
3. Ensure that the working environment is well-ventilated and free from dust. Keep the surface of the compressor clean. If you do not use the constant temperature and humidity test chamber for a long time, you should place the equipment in a space that is as clean as possible.
4. The voltage in the workplace must be stable. If the voltage is unstable, the current will be too large or too small. Running in this environment for a long time will cause great damage to the compressor. It is recommended to use a voltage regulator to connect the constant temperature constant. Wet test chamber
5, constant temperature and humidity test chamber should be placed in compliance with the prescribed environment: temperature: 5 °C ~ 30 °C, humidity: ≤ 85% RH, pressure: 86 ~ 106kpa
If you do the above points, you basically master the maintenance of the compressor. It will ensure that your normal equipment operates and effectively extend the service life of the equipment. If the compressor of the constant temperature and humidity test box is faulty, please inspect and inspect the professional technicians.
Here you can find the related products in Titanium Threaded Tube, we are professional manufacturer of Titanium Threaded Pipe, Titanium Threaded Pipe fittings, Titanium Threaded Tube rod, Titanium Threaded Pipe Grades. We focused on international export product development, production and sales.
Shaanxi Lasting Titanium Industry Co., Ltd. is one of the largest manufacturer and exporter of all kinds of titanium and titanium alloy products in China with more than 30 years experience. We mainly provide Titanium Powder, Titanium Ingots, Titanium forgings, Titanium Bar, TitaniumSheet/Plate, Titanium Tube/Pipe,Titanium fittings and titanium alloy products. Best-selling in the United States, Germany, Britain, Canada, Australia, France, Italy, the Netherlands, Norway, Brazil, Argentina, Iran, Qatar, Israel, South Korea, India, Singapore and other 50 countries and regions.
Our titanium products are widely used in aerospace engineering, automotive engineering, chemical and process industries, electrical resistance heating, marine engineering, oil and gas extraction industries, petrochemical processing and so on.
Titanium Threaded Tube, Titanium Threaded Pipe, Titanium Threaded Pipe fittings, Titanium Threaded Tube rod, Titanium Threaded Pipe Grades
SHAANXI LASTING TITANIUM INDUSTRY CO., LTD. , https://www.lastingti.com