China Manufacture Excellent Rubber Washer

Rubber gasket Rubber washer
Overview

Rubber washer is a sealing device made in the form of a torus (round top view), with a square shaped cross-section (side view).

Other names for Rubber washer would be Washer Rings, Lathe-Cut Rings, TetraSeal

The primary reason for using a Rubber washer in a sealing application is that they perform the sealing function in a superior manner - and at a cost lower than any other comparable sealing device. For existing applications, there is no need to change the design or procedures. Square-rings fit in O-ring grooves and are interchangeable size for size.

Rubber washer are available in a variety of rubber and plastic materials such as Buna, Viton, EPDM, Teflon, etc. In most static applications, a square ring will serve as a direct replacement for an O-ring and generally will perform a high pressure sealing function as well as or better than an O-ring.

Rubber washer Sizes
We primarily stock American Standard (AS568) sizes of square rings in Nitrile and Viton. We can also supply square rings to metric dimensions.

Standard rubber washer have the same I.D. as the AS568 sizes. However, the Cross Section dimension is slightly smaller for square rings. The chart above shows the square ring cross sections for the American Standard series sizes.

Features of Rubber washer:
Interchangeable with O-rings size for size (Standard AS568A sizes)
Uses same groove as O-ring
Can be used for radial seals
Material is homogenous, no joints, no laminations
Edges accurately formed
Extreme close tolerances held on cross-section, I.D. and O.D.
Controlled surface smoothness, hardness, elasticity, toxicity, texture
The modern, economical option for static applications
Available in many compounds



Now our company is specialize in producing seals of these materials: Viton A, Viton B, Viton F, Viton GF, GLT, GFLT, ETP, Aflas, ACM, AEM, VMQ.

Besides, we also product below item, such as PTFE Rubber Diaphragm, clamp seals, P seals, H seals, Casing Tubing Hanger Packers, FS Casing & Tubing Seal, Springsele, Teesele, Valve Rod Seal, Metal End Cap Seal, and so on.

We have the highest quality and lowest costs in the industry delivered on time.



Any questions for rubber gasket rubber washer, please do not hesitate to contact me. It is our pleasure to be on service of you!
Rubber gasket Rubber washer
Overview

Rubber washer is a sealing device made in the form of a torus (round top view), with a square shaped cross-section (side view).

Other names for Rubber washer would be Washer Rings, Lathe-Cut Rings, TetraSeal

The primary reason for using a Rubber washer in a sealing application is that they perform the sealing function in a superior manner - and at a cost lower than any other comparable sealing device. For existing applications, there is no need to change the design or procedures. Square-rings fit in O-ring grooves and are interchangeable size for size.

Rubber washer are available in a variety of rubber and plastic materials such as Buna, Viton, EPDM, Teflon, etc. In most static applications, a square ring will serve as a direct replacement for an O-ring and generally will perform a high pressure sealing function as well as or better than an O-ring.

Rubber washer Sizes
We primarily stock American Standard (AS568) sizes of square rings in Nitrile and Viton. We can also supply square rings to metric dimensions.

Standard rubber washer have the same I.D. as the AS568 sizes. However, the Cross Section dimension is slightly smaller for square rings. The chart above shows the square ring cross sections for the American Standard series sizes.

Features of Rubber washer:
Interchangeable with O-rings size for size (Standard AS568A sizes)
Uses same groove as O-ring
Can be used for radial seals
Material is homogenous, no joints, no laminations
Edges accurately formed
Extreme close tolerances held on cross-section, I.D. and O.D.
Controlled surface smoothness, hardness, elasticity, toxicity, texture
The modern, economical option for static applications
Available in many compounds



Now our company is specialize in producing seals of these materials: Viton A, Viton B, Viton F, Viton GF, GLT, GFLT, ETP, Aflas, ACM, AEM, VMQ.

Besides, we also product below item, such as PTFE Rubber Diaphragm, clamp seals, P seals, H seals, Casing Tubing Hanger Packers, FS Casing & Tubing Seal, Springsele, Teesele, Valve Rod Seal, Metal End Cap Seal, and so on.

We have the highest quality and lowest costs in the industry delivered on time.



Any questions for rubber gasket rubber washer, please do not hesitate to contact me. It is our pleasure to be on service of you!

Squeeze Bottle

A squeeze bottle is a container made of a flexible material such as plastic that allows the contents to be dispensed by squeezing the bottle. Squeezy BottlesThese bottles are typically used to hold condiments such as ketchup and mustard, but can also be used to hold a variety of other substances, such as soapy water, shower gel, or shampoo. The design of the squeeze bottle makes it easy to control the amount of material dispensed and also helps prevent spills and messes.Liquid Squeeze Bottle

Squeeze Bottle,Squeezy Bottles,Clear Squeeze Bottles,Liquid Squeeze Bottle

Kunshan Muchun Electric Co., LTD , https://www.muchunmanufacture.com