Airport Baggage Inspection X Ray Screening Scanner Machine

FEATURE:

x-ray luggage scanner
x-ray baggage scanner 
Airport x ray scanner 
security x ray machine 
x-ray screening machine
luggage scanner
baggage scanner 
x-ray security scanner
airport x-ray scanner
baggage scanning system
airport baggage scanner
luggage x-ray machine
airport x ray machines
1. Alarm by sounds & light: : Alarm by sounds and light when conform to condition.
2. Network interface: Could be connect local area network and support multi-terminal check baggage at same times
3. Safety ray: Transmit ray under automatic control, avoids the miss.
4. Turn off by a key control: Turn off the machine only need one step: Revolves the key. The equipment automatic security close-down, does not need complex many steps, is simpler.
5. Eagle-eye: Could be expediently observing enlargement area.
6. Estimate malfunction by self: Automatic estimate malfunction and prompt message, helpful for the maintenance.
TECHNICAL DATA:
Tunnel Size: 1000(W)× 1000(H)mm
Conveyor Speed: 0.2 m/s
Conveyor Max Load: 200 kg
Single inspection dosage < 1µ Gy
Wire Resolution: 0.1mm metal line
Steel Penetration: 30MM armor plate
Film Safety: For ISO 1600
Maximum leakage radiation <0.3µ GY/H
X-RAY GENERATOR:
Orientation: Vertically Upward
Tube Current: 0.4~1.2MA(adjustable)
Anode Voltage: 100~160 KV(adjustable)
Angle: 80°
Generator cooling/working periods Sealed oil bath with forced air/100%

IMAGE PERFORMANCE SYSTEM:
X-ray Sensor: L Type Photo-Diode array detector 12bit.
Monitor: High resolution 17inch color LCD display.
Color Quality: 24 Bit real colors.
Edge Enhancement: Object contour edge is more distinct.
Super Image Enhancement: Image detail is more distinct.
High penetrate strength display: Increase brightness of dark area in image to display object which is behind high absorptivity mass distinctly.
Low Penetrate strength Display: Increase contrast of low absorptivity mass (easy to penetrate) to display it distinctly.
Magnifier: Function of partial enlargement
Brightness/Dimming: Increase brightness of image/decrease brightness of image.
Image recurrence: Display previous twenty image and process any one of them.
Image restoration: Restore image to initial status at the time of stopping conveyor
Image storing: Real Time store any image and process it in operation status.

MULTI-ENERGY FUNCTION:

ETHERNET TCP/IP FUNCTION
OPERATING ENVIRONMENT:
Storage Temperature: -20to 60C
Operating Temperature: 0 to 45C
Relative Humidity: 20 to 95% non-condensing
System Power: 220 VAC (± 10%) 50± 3HZ
Power wastage: 1.5 KW (Max)
Noise: <65DB


  FEATURE:

x-ray luggage scanner
x-ray baggage scanner 
Airport x ray scanner 
security x ray machine 
x-ray screening machine
luggage scanner
baggage scanner 
x-ray security scanner
airport x-ray scanner
baggage scanning system
airport baggage scanner
luggage x-ray machine
airport x ray machines
1. Alarm by sounds & light: : Alarm by sounds and light when conform to condition.
2. Network interface: Could be connect local area network and support multi-terminal check baggage at same times
3. Safety ray: Transmit ray under automatic control, avoids the miss.
4. Turn off by a key control: Turn off the machine only need one step: Revolves the key. The equipment automatic security close-down, does not need complex many steps, is simpler.
5. Eagle-eye: Could be expediently observing enlargement area.
6. Estimate malfunction by self: Automatic estimate malfunction and prompt message, helpful for the maintenance.
TECHNICAL DATA:
Tunnel Size: 1000(W)× 1000(H)mm
Conveyor Speed: 0.2 m/s
Conveyor Max Load: 200 kg
Single inspection dosage < 1µ Gy
Wire Resolution: 0.1mm metal line
Steel Penetration: 30MM armor plate
Film Safety: For ISO 1600
Maximum leakage radiation <0.3µ GY/H
X-RAY GENERATOR:
Orientation: Vertically Upward
Tube Current: 0.4~1.2MA(adjustable)
Anode Voltage: 100~160 KV(adjustable)
Angle: 80°
Generator cooling/working periods Sealed oil bath with forced air/100%

IMAGE PERFORMANCE SYSTEM:
X-ray Sensor: L Type Photo-Diode array detector 12bit.
Monitor: High resolution 17inch color LCD display.
Color Quality: 24 Bit real colors.
Edge Enhancement: Object contour edge is more distinct.
Super Image Enhancement: Image detail is more distinct.
High penetrate strength display: Increase brightness of dark area in image to display object which is behind high absorptivity mass distinctly.
Low Penetrate strength Display: Increase contrast of low absorptivity mass (easy to penetrate) to display it distinctly.
Magnifier: Function of partial enlargement
Brightness/Dimming: Increase brightness of image/decrease brightness of image.
Image recurrence: Display previous twenty image and process any one of them.
Image restoration: Restore image to initial status at the time of stopping conveyor
Image storing: Real Time store any image and process it in operation status.

MULTI-ENERGY FUNCTION:

ETHERNET TCP/IP FUNCTION
OPERATING ENVIRONMENT:
Storage Temperature: -20to 60C
Operating Temperature: 0 to 45C
Relative Humidity: 20 to 95% non-condensing
System Power: 220 VAC (± 10%) 50± 3HZ
Power wastage: 1.5 KW (Max)
Noise: <65DB


 

PCB Separator

1. The cutting speed of the board divider can be set to high or low.

2. Maximum travel of knife wheel: 600mm.

3. Knife wheel micro-adjustment: 0-2mm.

4. Adjustable lower board knife: 0-50mm.
5. Backstop depth adjustable range: 0-150mm, maximum PCB board cutting width: 150mm, maximum PCB board cutting length: 400mm
6. Thickness: 0.2-3.2mm, maximum thickness between V-slots: 0.25-2.0mm
7. Connecting multiple pieces of PCB board in the solder, folding often hurt the line, or will be broken electronic parts, the use of the board splitter can avoid damage, and can improve efficiency and quality.
8. With the walking knife type board splitting machine to divide, can completely reduce the stress, to prevent the cracking of solder joints and parts breakage.
9. Using the upper circular knife under the flat knife method, PCB board to the board splitting machine under the flat knife, switch a step, the upper circular knife moving across to the set point, the PCB board will be cut off and divided, cut off without stripping, the cut is flat.
10. Slitter knife travel can be set at will with the length of the PCB board forward stopping fixed point, stopping fixed point for 0-100-200-300-400mm.
11. Cutter back with cut-off length stopper, according to the different width of the PCB board to do the adjustment, for no V-CUT slot PCB board can also easily cut the board, accurate not oblique cut.
12. Can fine-tune the thickness of various PCB boards, to solve the problem of PCB board V-CUT slot depth.

PCB separator,PCB cutting machine,V-cut pcb separator,V-cut pcb machine

SINGSUN ELECTRONIC SCIENCE & TECH CO.,LTD , https://www.szsingsunautomatic.com