240 Color Steel Long Span Arch Shape Steel Roof Building Roll Forming Machine

  • Tile Type: Colored Steel
  • Customized: Customized
  • Transmission Method: Electric
  • Condition: New
  • Usage: Roof
  • HS Code: 8455229090
240 Color Steel Long Span Arch Shape Steel Roof Building Roll Forming Machine
 

 Introduction

 

Arch building machine consists of two parts, one is forming part, another is arching part. These two parts are sit on a mobile frame moving from here and there. Someone even call it mobile factory. We are the professional manufacture with 20 more years since the beginnings in China. Not only sell equipments but also offer engineering service. 

  

Machine Components

 

a) De-coiler b) Roll-forming device
c) Hydraulic cutter d) PLC control system
e) Curving device  f) Necessary accessories

 

 

Technical description


Suitable material: galvanized steel, colored steel, etc

Total weight:11tons

Coil thickness: 0.6 -1.5mm

Roller stands:16

Main Power:5.5kw

Secondly power 4.0kw

Side power 1.5kw*2

Hydraulic cutting power:4.0kw

Roller material: 40Cr,quenched by HRC58-62

Shaft material: No.45 steel  

Cutting Blade material:Cr12 Mov.

 

Power supply: AC380V±10%, 50Hz, or as per your requirement

Main machine dimension: 8.9m × 2.m × 2.2m




240 Color Steel Long Span Arch Shape Steel Roof Building Roll Forming Machine

240 Color Steel Long Span Arch Shape Steel Roof Building Roll Forming Machine

 

Model list

 

 

Type Width of the coil Width of the formed sheet Thickness of the coil Max span Use ratio The depth of the groove
LS-1250-800 1250mm 800mm 1.0-1.5 mm ≤45m 64% 320mm
LS-1000-800 1000mm 800mm 0.8-1.5 mm ≤25m 80% 114mm
LS-1000-750 1000mm 750mm 0.8-1.5 mm ≤28m 75% 138mm
LS-1000-700 1000mm 700mm 0.8-1.5 mm ≤25m 70% 175mm
LS-1000-680 1000mm 680mm 0.8-1.5 mm ≤36m 68% 223mm
LS-1000-610 1000mm 610mm 0.8-1.5 mm ≤45m 61% 243mm
LS-1000-550 1000mm 550mm 0.8-1.5 mm ≤45m 55% 187.5mm
LS-1000-400 1000mm 400mm 0.8-1.5 mm ≤45m 40% 253mm
LS-914-750 914mm 750mm 0.8-1.5 mm ≤20m 82% 86mm
LS-914-700 914mm 700mm 0.8-1.5 mm ≤25m 76% 123mm
LS-914-650 914mm 650mm 0.8-1.5 mm ≤28m 71% 181mm
LS-914-610 914mm 610mm 0.8-1.5 mm ≤40m 66% 203mm
LS-914-400 914mm 400mm 0.8-1.5 mm ≤45m 43% 210mm
LS-600-305 600mm 305mm 0.8-1.5 mm ≤30m 51% 109mm


Performance

240 Color Steel Long Span Arch Shape Steel Roof Building Roll Forming Machine
240 Color Steel Long Span Arch Shape Steel Roof Building Roll Forming Machine

240 Color Steel Long Span Arch Shape Steel Roof Building Roll Forming Machine


240 Color Steel Long Span Arch Shape Steel Roof Building Roll Forming Machine


Contact me:

Maxine
 
mobile number:0086-15941796785
 
 

The Hollow Paddle Dryer is a high efficiency and energy saving dryer. It can handle powders, paste or slurry. It has large heat conduction area which can remove the water quickly.


Adopting saturated steam, hot water or heat conducting oil as the heating medium, the paddle dryer is an indirect-heating and low-speed stirring drying equipment, and both the continuous and intermittent operations can be carried through. It can be used for product cooling with the usage of cooling medium.The paddle dryer is mainly used for the drying or cooling of powder, granular, cake-shaped, paste and the slurry-like materials.


1. The cost of the blade dryer is low: The unit effective volume has very large heat transferring surface, so the processing time is shorted, the size of the equipment becomes small. The building area and place are sharply decreased.

2. The range of material to be processed is wide: Heat sensitive material and the materials to be processed under high temperature might be processed with different heating media. The normal media are: steam, thermal oil, hot water and chill water. It might be continuous or batch operation, widely used in many areas.

3. The pollution is less: Without any carrying air, very little powder is carried out. The solvent evaporated is very few, it easy to be processed. For the material that might cause pollution or the solvent to be recovered, it might adopt sealed circulation.

4. The operation cost is low: 1hour/day.operator is enough for normal operation. Low stirring speed and reasonable structure, the worn amount is few, and the maintenance fee is low.

5. Steady operation: The material particles fully contact heat transferring surface, because of the special compressing and swell-stirring effect of the wedge shaped blade. The difference of the temperature, humidity and mixing effect are very small in the different axial area, so to ensure the stability of process.

Hollow Paddle Dryer

Hollow Paddle Dryer Machinery, Hollow Blade Dryer, Hollow Paddle Drying Equipment

Changzhou Ruide Drying Engineering Technology Co., Ltd , http://www.rddryer.com